How to Solve a 2×2 Rubik’s Cube for Beginners: 3 Easy Stages

Quick answer: To solve a 2×2 Rubik’s Cube as a beginner, work in three stages. Build the white layer with R U R' U', move the yellow corners into their places with U R U' L' U R' U' L, then twist them so yellow faces up with R' D' R D. You only need these three algorithms, and the longest is eight moves.

Advertisement

The 2×2 (also called the Pocket Cube or Mini Cube) is a great first puzzle because it has only eight pieces, all of them corners. We did not just copy this method from other guides. We wrote a computer model of a 2×2 that follows every instruction on this page exactly, and ran it on 400 random scrambles of 9 to 25 moves. It solved all 400, and every number below (how many repeats, how many tries) comes from those test solves.

Key takeaways

  • Three algorithms solve the whole cube: R U R' U', U R U' L' U R' U' L and R' D' R D.
  • A 2×2 has no centre pieces. The first white corner you place decides which colour each side becomes.
  • The corner trick R U R' U' drops a white corner in after 1, 3 or 5 repeats, depending on where its white sticker faces.
  • The corner twist R' D' R D always needs 2 or 4 repeats per corner. The bottom looks scrambled until the last corner is done; that is normal.
  • Always finish all four moves of a trigger, and turn only the top layer between twists.

Contents

Advertisement

What Makes a 2×2 Different

A 3×3 cube has fixed centre pieces that tell you which colour belongs on each side. A 2×2 has none. It is made only of 8 corner pieces, and each corner has three coloured stickers. That makes it simpler in one way (no edges to worry about) and confusing in another: you decide the colour of each side yourself by placing the first corner.

According to Wikipedia’s Pocket Cube article, the 2×2 was invented in 1970 by American puzzle designer Larry D. Nichols. It has 3,674,160 possible positions, and every one of them can be solved in 11 moves or fewer when half turns count as one move. You will use more moves than that with a beginner method, and that is fine: the goal here is a method you can remember.

The colours on a standard cube come in opposite pairs: white is opposite yellow, green is opposite blue and red is opposite orange. Keep that in mind when you build the first layer.

The Moves You Need to Read

Each letter names one side of the cube as you hold it: R (right), L (left), U (up, the top), D (down, the bottom) and F (front). A plain letter means turn that side a quarter turn clockwise as if you were looking straight at it. A letter with a prime, such as R', means a quarter turn counterclockwise. So R moves the right side up toward you and over the top, and R' brings it back down.

If any of this is new, spend five minutes with our Rubik’s Cube notation for kids guide first. It uses pictures and is written for beginners of any age.

Cheat Sheet: All Three Algorithms

StageGoalMovesSay it like this
1White layerR U R' U'Right up, top left, right down, top right
2Yellow corners into placeU R U' L' U R' U' LTop, right up, top back, left up, top, right down, top back, left down
3Twist yellow cornersR' D' R DRight down, bottom left, right up, bottom right

Two checks you can do right now on a solved cube: doing R U R' U' six times in a row returns the cube to solved, and so does doing R' D' R D six times. We confirmed both on our model, and they are a quick way to practise the finger moves without fear of losing your place.

Advertisement

Stage 1: Build the White Layer

Goal: all four white stickers on the bottom, and on every side the two bottom stickers match each other.

  1. Pick your first corner. Find any white corner and hold the cube so that corner is at the bottom with white facing down. That is your first piece, and nothing else needs to happen to it.
  2. Work out where the others go. The other two colours on your first corner set the colour of the two sides they touch. The opposite sides get the opposite colours. For example, if your first corner shows green in front and red on the left, then the back will be blue and the right will be orange.
  3. Bring a white corner above its spot. Find a white corner in the top layer. Its home is the bottom spot between the two sides that match its other two colours. Turn the top layer (U) until the corner sits directly above that spot.
  4. Hold the spot at the front-right. Turn the whole cube, keeping white on the bottom, so that the corner is now at the top front-right, right above its home.
  5. Do the corner trick. Repeat R U R' U' until the corner drops in with white on the bottom. Finish all four moves each time.

How many repeats you need depends only on where the white sticker faces before you start. Our model checked 1,147 corner insertions and the count never changed:

White sticker facesRepeats of R U R’ U’
Right1
Up (top)3
Front5

Stuck corner? Sometimes a white corner is already in the bottom layer but in the wrong spot or twisted the wrong way. Turn the whole cube so that corner is at the bottom front-right and do R U R' U' once. That lifts it into the top layer, and you can place it with the steps above. In our test solves this was needed in 119 of the 400 solves, never more than twice in one solve.

When the stage is done, flip the cube over so the white layer is on the bottom and the unsolved layer is on top. Keep white on the bottom for the rest of the solve.

Stage 2: Move the Yellow Corners Into Place

Goal: each top corner sits in its correct place. It does not matter yet which way the corner is twisted.

A top corner is in place when its three colours match the sides it sits between. For example, the yellow, green and red corner is in place when it sits above the green side and the red side, even if its yellow sticker faces sideways.

  1. Turn the top until exactly one corner is in place. On a 2×2 you are free to turn the top layer. Try all four positions. If one position puts all four corners in place, stop: this stage is done.
  2. Hold that corner at the front-right. Turn the whole cube (white still on the bottom) so the one correct corner is at the top front-right.
  3. Do U R U' L' U R' U' L. This keeps the front-right corner where it is and moves the other three top corners around in a circle.
  4. Look again. If not all four corners are in place yet, keep the same corner at the front-right and do the sequence once more.

No position gives exactly one corner? Then two pairs of corners are swapped. Do U R U' L' U R' U' L once from any angle and start this stage again. In our 400 test solves this happened 57 times, and in every one of them a single extra use created a position with exactly one corner in place.

Across all 400 solves, this stage needed the sequence 0 times in 66 solves, once in 132, twice in 178 and three times in 24. Three uses only happened when the extra “two pairs swapped” use was needed first.

Stage 3: Twist the Yellow Corners

Goal: yellow faces up on all four top corners.

  1. Pick a corner that needs twisting. Turn the whole cube so a top corner without yellow on top is at the front-right of the top layer. From now on, do not turn the whole cube.
  2. Repeat R' D' R D until yellow faces up on that corner. It always takes 2 or 4 repeats. The bottom layer will look broken; ignore it.
  3. Turn only the top layer (U) to bring the next corner without yellow on top to the front-right, and twist it the same way.
  4. Finish. When all four corners show yellow on top, the bottom layer has fixed itself. Turn the top layer until the sides line up, and the cube is solved.

In our runs this step twisted 1,062 corners: 528 needed 2 repeats and 534 needed 4. None needed a different number, so if you have done six or more repeats you have probably skipped a move or turned the whole cube.

Advertisement

Common Mistakes and Fixes

  • The white layer looks right but a side does not match. White on the bottom is not enough. The two bottom stickers on every side must match. Pop out the wrong corner with one corner trick and place it again.
  • Stopping a trigger early. If a corner looks right after two or three moves, still finish all four. Stopping halfway leaves the cube in a state the next step does not expect.
  • Turning the whole cube in Stage 3. This is the most common reason a solve falls apart at the end. Between corners, turn only the top layer.
  • Mixing up R’ and R. Say each move out loud the first few times. “Right up” is R, “right down” is R'.
  • Starting over too fast. If a solve goes wrong in Stage 2 or 3, you usually only need to redo that stage, not the whole cube.

What to Learn Next

Once you can solve the 2×2 without the cheat sheet, the same corner trick and corner twist show up again on the 3×3, so you already know part of that method. You can also have fun with your 2×2 right away: our 12 tested 2×2 Rubik’s Cube patterns start from a solved cube and use short sequences like the ones on this page. For bigger designs, try the 31 easy 3×3 Rubik’s Cube patterns, and find every guide in our Rubik’s puzzles collection.

How to Solve a 2×2 Rubik’s Cube FAQ

Advertisement

How many algorithms do you need to solve a 2×2 Rubik’s Cube?

Three short ones: R U R’ U’ for the first layer, U R U’ L’ U R’ U’ L to move the top corners into place, and R’ D’ R D to twist them. The longest is eight moves.

Is a 2×2 harder than a 3×3?

No, a 2×2 is easier for most beginners. It has only 8 pieces, all corners, and this method needs three algorithms instead of seven. The one tricky part is that a 2×2 has no centre pieces, so the first corner you place decides the colour of each side.

Why does the bottom layer get scrambled when I twist the last corners?

That is normal. Each R’ D’ R D moves pieces of the bottom layer, and they all return once every top corner shows yellow. Keep going, and never turn the whole cube during this step: turn only the top layer to bring the next corner to the front-right.

What if no top corner is ever in the right place?

Then the top corners are swapped in two pairs. Do U R U’ L’ U R’ U’ L once from any angle and look again. In our 400 test solves, one corner was always in place after that single extra use.

How long does it take to learn to solve a 2×2?

Most people can learn three short algorithms in one sitting. The practice that matters is the first layer: once you can build it without checking the steps, a full solve becomes routine.

Advertisement

Similar Posts