How to Solve a Pyraminx for Beginners: 6 Easy Steps and 4 Algorithms

Quick answer: To solve a Pyraminx as a beginner, (1) twist the four tips to match their centres, (2) turn three centres so one colour faces down, (3) insert the three bottom edges with L' U L or R U' R', (4) line up the top centre, (5) move the top edges with R U R' U R U R', and (6) flip any two flipped edges with R' L R L' U L' U' L. That is four short algorithms in total.

Advertisement

The Pyraminx is the pyramid-shaped puzzle that looks hard but is one of the easiest twisty puzzles to learn. We did not just copy steps from another guide: we built a computer model of the Pyraminx, checked it against the published total of 933,120 positions, and had it follow this exact page on 400 random scrambles. It solved all 400, and the numbers you will see below come from those test solves.

Key takeaways

  • Six steps and four algorithms. The two algorithms for the bottom edges are only three moves long.
  • Tips first: each one needs at most one twist and never moves again on its own.
  • Build one coloured bottom (we use yellow), then solve the top.
  • The top edges need R U R' U R U R' zero, one or two times; in our tests each count came up about a third of the time.
  • At the end there are always either 0 or 2 flipped edges, and one algorithm fixes the 2.

Contents

Advertisement

Know the Pieces

The Pyraminx has four faces and three kinds of pieces:

  • 4 tips: the tiny pyramids at each corner. They turn on their own.
  • 4 centres: the larger pieces right under each tip, showing three colours. They can twist but never leave their corner, so they decide each face’s colour.
  • 6 edges: the two-coloured pieces along the six edges of the pyramid. These are the pieces that really move around.

According to Jaap’s Puzzle Page, the Pyraminx was invented by Uwe Mèffert in about 1971. Ignoring the tips it has 933,120 positions, and any of them can be solved in 11 turns or fewer. It is also an official World Cube Association event, so you can compete with it once you get fast.

How to Hold It and Read the Moves

Hold the Pyraminx with one face toward you and one face flat on the bottom. The four corners are named U (top), L (front-left), R (front-right) and B (back).

  • U, L, R, B turn that corner’s big layer (tip, centre and the edges next to it) a third of a turn clockwise, as seen when you look straight at that corner.
  • A prime, such as R', means counterclockwise.
  • Lower-case u, l, r, b turn only the tip.

The letters work like Rubik’s Cube notation. If you have never used it, our Rubik’s Cube notation for kids guide explains the idea with pictures.

Cheat Sheet

StepGoalMoves
1TipsTwist each tip (no algorithm)
2Bottom centresTurn L, R or B (no algorithm)
3Bottom edge, case rightL' U L
3Bottom edge, case leftR U' R'
4Top centreTurn U (no algorithm)
5Top edges into placeR U R' U R U R'
6Flip two edgesR' L R L' U L' U' L
Advertisement

Step 1: Solve the Tips

Look at each tip and the centre piece right under it. Twist the tip (with u, l, r or b, or their primes) until its three colours line up with the centre’s three colours. Each tip needs at most one twist, either way. In our test scrambles about one tip in four was already correct.

Because the big moves always carry the tip along with its centre, a solved tip stays solved for the rest of the solve. Do not forget this step at the very end of a speed solve: a puzzle with one twisted tip is not solved.

Step 2: Turn the Bottom Centres

Pick a colour for the bottom. We use yellow. Each centre piece shows three of the four colours, so exactly one centre has no yellow. Hold the Pyraminx with that corner on top (U) and a face toward you.

Now the three bottom corners (L, R and B) each show yellow somewhere. Turn each one with L, R or B (or the prime) until its yellow triangle faces down. Each needs at most one turn. The edges move around while you do this; that is fine.

When you are done, the two lower centres on each side face show the same colour. That colour is the colour the whole face will be.

Step 3: Insert the Bottom Edges

Keep yellow on the bottom. There are three bottom edge slots, and you fill them one at a time at the front-bottom of the puzzle.

  1. Find the edge. The front face’s colour is the colour of its two lower centres. The edge you need has yellow and that colour.
  2. If it is in the top layer, turn U until it sits on the front face with its non-yellow colour facing you. Then:
    • Edge at the top right of the front face, yellow facing right: do L' U L.
    • Edge at the top left of the front face, yellow facing left: do R U' R'.
  3. If it is already in the bottom layer but in the wrong slot, or flipped with yellow facing you, turn the whole puzzle so that slot is at the front-bottom and do R U' R'. The edge pops up into the top layer. Turn the puzzle back and use the step above.
  4. Next slot. Turn the whole puzzle a third of a turn, yellow still down, and repeat for the next slot.

In all 400 test solves, every top-layer edge could be turned to one of those two cases with at most two U turns,. Both cases come up often: 563 right-hand and 487 left-hand insertions in our runs. Do not worry about the top centre yet; it gets fixed in the next step.

Advertisement

Step 4: Line Up the Top Centre

Turn U until the top centre’s three colours match the three side faces below it. Now every tip and every centre is solved, and only the three top edges are left.

Step 5: Move the Top Edges Into Place

An edge is in place when its two colours match the two faces it touches, even if they are on the wrong sides (flipped). Check the three top edges. Either all three are in place, or none is. In our tests it was never one or two.

  • All three in place: go to Step 6.
  • None in place: do R U R' U R U R' from any side. It moves the three top edges around in a circle: seen from above, the back edge goes to the left, the left edge to the right and the right edge to the back. Check again. If they are still not in place, do it once more.

Across 400 solves, this step needed the algorithm 0 times in 132 solves, once in 131 and twice in 137. If you can see that the edges need to travel the other way, you can do the mirror L' U' L U' L' U' L once instead of the algorithm twice; on our model the two give exactly the same result.

Step 6: Flip the Last Edges

Now count the top edges that are flipped (in place, but with colours on the wrong sides). There will be either 0 or 2.

  • 0 flipped: the Pyraminx is solved.
  • 2 flipped: turn the whole puzzle so the one correct edge is at the back, meaning the two flipped edges are at the top left and top right of the front face. Do R' L R L' U L' U' L. It flips exactly those two edges and leaves everything else alone.

In our 400 test solves, 286 needed this final flip and 114 were already solved after Step 5.

Advertisement

Common Mistakes

  • Mixing up upper and lower case. R turns the big layer, r turns only the tip. In this method lower-case moves are used in Step 1 only.
  • Turning the whole puzzle in the middle of an algorithm. Finish all the moves with the same grip, then reposition.
  • Using the wrong bottom-edge case. Check which side yellow faces: right means L' U L, left means R U' R'.
  • Forgetting the top centre. Step 5 only makes sense once the top centre matches the sides.
  • Flipping from the wrong side. In Step 6 the correct edge goes to the back, not the front.

Once you can solve it, take the puzzle to a group with our Rubik’s Cube activities for kids. If you want to explore cube shapes next, the 31 easy 3×3 patterns are a good start, and all our guides are collected in the Rubik’s puzzles collection.

How to Solve a Pyraminx FAQ

Is the Pyraminx easier than a Rubik’s Cube?

Yes, for most beginners. It has only 14 moving parts that matter (4 tips, 4 centres and 6 edges), and this method needs just four short algorithms. Many people learn it in one afternoon.

How many algorithms do you need to solve a Pyraminx?

Four for this beginner method: L’ U L and R U’ R’ for the bottom edges, R U R’ U R U R’ to move the top edges, and R’ L R L’ U L’ U’ L to flip two edges. Two of them are only three moves long.

What do the small letters u, l, r and b mean?

They turn only the tip at that corner. Tips never affect the rest of the puzzle, which is why this method fixes them first and then forgets about them.

Why are two of my top edges flipped at the end?

That is a normal last step. Hold the Pyraminx so the correct edge is at the back and do R’ L R L’ U L’ U’ L. In our 400 test solves, the number of flipped edges at this point was always 0 or 2, never 1 or 3.

What is the most moves a Pyraminx can need?

Ignoring the tips, every position can be solved in 11 turns or fewer, and only 32 of the 933,120 positions need all 11. A beginner method uses more moves than that, but it is much easier to remember.

Advertisement

Similar Posts